Fluxgate Magnetometer FGM-301
The same high precision magnetometer that is an exceptional magnetic heading reference sensor for our AHRS units is also available as a stand-alone analog magnetic sensor. Its high accuracy makes the Watson FGM an ideal choice for inertial navigation, geological mapping, and heading reference.
Features:
- High Accuracy
- High Resolution
- High Reliability
- Low Noise
- Low Power
- Small Size and Weight
- Two Year Warranty
- Engineering Support
Description
The FGM-301 is the best product for measuring DC and low frequency magnetic fields in three dimensions. This is a compact magnetic sensing device suitable for a wide variety of magnetic field measurement applications. Being an analog sensor, the FGM-301 provides high resolution and low signal delay. This product is far more stable and linear than magneto-resistive and magneto-inductive magnetometers.
Watson Industries has been developing state-of-the-art fluxgate magnetometers for almost thirty years to provide the FGM-301. As a result, this magnetometer is relied on for precision measurements in very critical projects around the world, including near the north and south poles.
Specifications
Magnetic |
|||
Range: X, Y, Z | ±700 mGauss | ±70,000 nTesla | |
Analog Scale Factor: | ±200 mGauss/V | ±3.5V Output | |
Scale Factor Accuracy: | 2% | ||
Scale Factor Matching Between Axes: | < 0.2% | ||
Scale Factor Temp Coefficient: | ±100 ppm per °C | Typical | |
Bias: | < 5 mGauss | ||
Non-Linearity: | < 0.01% | ||
Bandwidth: | 30 Hz | ||
Noise: | < 0.3 mGauss rms (Typical) | <10 uGauss in 1 Hz bandwidth | |
Output Ripple: | < 0.2 mGauss P-P | ||
Environmental |
|||
Temperature: Operating | -50°C to 85°C | ||
Temperature: Storage | -50°C to 85°C | ||
Vibration: Operating | 3g rms | 100 Hz to 1 KHz | |
Vibration: Survival | 4g rms | 100 Hz to 1 KHz | |
Shock: Survival | 200g | 10mS ½ sine wave | |
Electrical |
|||
Input Power: | 6 to 16VDC | < 1W | |
Input Current: | 55mA | ||
Analog Output: | ±3.5VDC | ||
Analog Output Impedance: | 1000 Ohm | ||
Physical |
|||
Axis Alignment: | < 0.3° | ||
Size: Including Mounting Flanges | 1.0W x 4.18″L x1.0″H | 2.5 x 10.6 x 2.5 (cm) | |
Weight: | 3.1 oz | 88 grams | |
Connection: | 9 pin male “D” subminiature | ||
Life: | > 50,000 Hrs MTBF | ||
• | Specifications are subject to change without notice. | ||
• | This product may be subject to export restrictions. Export Classification ECCN EAR99. |
Applications
- Aerospace
- Target Drone Compass System
- Heading Reference
- Land
- Solar Storm Detection
- Magnetic Field Measurement
- Magnetic Mass Sensing
- Geological Mapping
- Heading Reference
- Ocean
- Magnetic Field Measurement
- Heading Reference