Gyro-Stabilized Mount SMS-P233
The SMS-P233 stabilizes its payload in the bank and elevation axis. The system keeps its payload level regardless of vehicle motions.
Features:
- 25 Kg Payload
- High Stability
- High Reliability
- Low Cost
- Low Noise
- Two Year Limited Warranty
- Engineering Support
Description
Stabilization is one of our specialties at Watson Industries. We have been involved with a large number of applications, from trains to cameras. The SMS is designed primarily for instrumentation: it stabilizes on the Bank (X) and Elevation (Y) axis so that the mounting arm with its payload will always stay level, regardless of the motions of the vehicle.
Our gyro-stabilized platforms are built around a rugged pan and tilt mechanism. This is a high resolution digital system uses the best wide bandwidth, low noise, solid-state gyros. The whole system is user configurable and can adapt to a wide range of payloads and requirements.
Watson Industries also provides custom systems for special requirements. Our system design is modular and configurable for economical and quick adaptation to a wide variety of hardware configurations. Of course Watson Industries’ excellent product support and applications engineering goes along with every product.
Specifications
Platform |
|||
Range: Bank, Elevation | ±30° (Electronic) | ±35° (Mechanical) | |
Slew Rate: Bank, Elevation | ±45°/sec | ||
Attitude Accuracy: Static | ±1.5° | ||
Attitude Accuracy: Dynamic | ±3.0° | ||
Noise: | 0.1° rms | ||
Stability: | ±1.5° | Over 20 minutes | |
Environmental |
|||
Temperature: Operating | -20°C to +50°C | ||
Temperature: Storage | -50°C to +80°C | ||
Vibration: Operating | 0.2 g rms | 100 Hz to 1 KHz | |
Vibration: Survival | 0.5 g rms | 100 Hz to 1 KHz | |
Electrical |
|||
Startup Time: Operational | 5 seconds | ||
Startup Time: Full Performance | 90 seconds | ||
Input Power: | 18 to 30 VDC | ||
Input Current: | 2A @ 28VDC | 6A Peak | |
Physical |
|||
Size: Including Mounting Flanges | 9.2″W x 15.9″L x 7.5″H | 23.4 x 40.4 x 19.0 (cm) | |
Weight: | 28 lb (12.7 Kg) | Not including payload | |
Connection: | MS3102E-20-7P | Mating connector included | |
Capacity: | 25Kg | With counterweight | |
Base Mounting Holes: | Qty 8 (4 x M6 threaded; 4 x #12 M6 clearance) | 4″ dia. bolt circle | |
Payload Mounting Holes: | Qty 8 #12 (M6) clearance | 4″ dia. bolt circle | |
• | Specifications are subject to change without notice. | ||
• | This product may be subject to export restrictions. Export Classification ECCN EAR99. |