ARS-P342-3A is made for performance. This gyro has excellent stability, low bias, high scale factor accuracy and ease of use.
Watson Industries has been designing and manufacturing solid-state gyros since 1980. Based on proven technology, this gyro is built under ISO 9001:2015 quality standards with new features including built in-test and enhanced EMI/RFI protection.
The ARS-P342-3A has excellent performance for acceleration insensitivity, low mounting sensitivity and vibration rejection. This is achieved by having a sensing element that is finely tuned and temperature compensated. The advanced tuning methods allow better relative tolerances and better signal to noise performance. Special internal mounting holds the gyro sensing element in a stable alignment while rejecting linear vibration.
Upgrades that are standard for ARS-P342-3A include available rate ranges up to 475 degrees per second, internal power regulation for power input between 8 volts and 45 volts, and a case mounted connector.
|Range: X, Y, Z||±200°/sec|
|Analog Scale Factor:||25mV/°/sec||40°/sec/V|
|Scale Factor Accuracy:||0.2%||At constant room temperature|
|Scale Factor Temp Coefficient:||0.5%||Over temperature range|
|Bias:||±0.1°/sec||At room temp|
|Bias: Over Temp Range||±0.5°/sec|
|Non-Linearity:||< 0.15%||Full scale range|
|Noise:||< 0.5°/sec rms||1 Hz to 100 Hz|
|Temperature: Operating||-40°C to +85°C|
|Temperature: Storage||-55°C to +85°C|
|Vibration: Operating||5g rms||20 Hz to 2 KHz|
|Vibration: Survival||10g rms||20 Hz to 2 KHz|
|Shock: Survival||500g||10mS ½ sine wave|
|Input Power:||8 to 45VDC||Reverse protected|
|Input Current:||180mA @ 12VDC||2.4W|
|Analog Output Impedance:||1000 Ohm||5%|
|Axis Alignment:||< 0.2°|
|Size: Including Mounting Flanges||3.24″W x 5.78″L x 1.70″H||8.2 x 14.7 x 4.3 (cm)|
|Weight:||15.3 oz (1lb)||435 grams (0.4Kg)|
|Connection:||9 pin male “D” subminiature|
|•||Specifications are subject to change without notice.|
|•||This product may be subject to export restrictions. Export Classification ECCN EAR99.|