Description
Stabilization is one of our specialties at Watson Industries. We have been involved with a large number of applications, from trains to cameras. The SMS is designed primarily for instrumentation: it stabilizes on the Bank (X) and Elevation (Y) axis so that the mounting arm with its payload will always stay level, regardless of the motions of the vehicle.
Our gyro-stabilized platforms are built around a rugged pan and tilt mechanism. This is a high resolution digital system uses the best wide bandwidth, low noise, solid-state gyros. The whole system is user configurable and can adapt to a wide range of payloads and requirements.
Watson Industries also provides custom systems for special requirements. Our system design is modular and configurable for economical and quick adaptation to a wide variety of hardware configurations. Of course Watson Industries’ excellent product support and applications engineering goes along with every product.
Applications
Downloads
Download Spec Sheet (PDF, 470.9 KB)
Download Manual (PDF, 1.1 MB)
Specifications
Specifications |
|||
Platform |
|||
| Range: Bank, Elevation | ±30° (Electronic) | ±45° (Mechanical) | |
| Slew Rate: Bank, Elevation | ±45°/sec | ||
| Attitude Accuracy: Static | ±1.5° | ||
| Attitude Accuracy: Dynamic | ±3.0° | ||
| Noise: | 0.1° rms | ||
| Stability: | ±1.5° | Over 20 minutes | |
Environmental |
|||
| Temperature: Operating | -20°C to +50°C | ||
| Temperature: Storage | -50°C to +80°C | ||
| Vibration: Operating | 0.2 g rms | 100 Hz to 1 KHz | |
| Vibration: Survival | 0.5 g rms | 100 Hz to 1 KHz | |
Electrical |
|||
| Startup Time: Operational | 5 seconds | ||
| Startup Time: Full Performance | 90 seconds | ||
| Input Power: | 18 to 30 VDC | ||
| Input Current: | 2A @ 28VDC | 6A Peak | |
Physical |
|||
| Size: Including Mounting Flanges | 8.9″W x 15.8″L x 7.3″H | 22.6 x 40.1 x 18.5 (cm) | |
| Weight: | 28 lb (12.7 Kg) | Not including payload | |
| Connection: | MS3102A-20-7P | Mating connector included | |
| Capacity: | 25Kg | With counterweight | |
| Base Mounting Holes: | Qty 8 (4 x M6 threaded; 4 x #12 M6 clearance) | 4″ dia. bolt circle | |
| Payload Mounting Holes: | Qty 8 #12 (M6) clearance | 4″ dia. bolt circle | |
| • | Specifications are subject to change without notice. | ||
| • | This product may be subject to export restrictions. Export Classification ECCN EAR99. | ||
Reviews
There are no reviews yet.